Element 1 Question 1-15C2
C1C15: MF-HF Equipment Controls
Why must all MF-HF Distress, Urgency and Safety communications take place solely on the 6 assigned frequencies and in the simplex operating mode?
- For non-GMDSS ships, to maximize the chances for other vessels to receive those communications.
- Answers a) and c) are both correct. (correct answer)
- For GMDSS or DSC-equipped ships, to maximize the chances for other vessels to receive those communications following the transmission of a DSC call of the correct priority.
- To enable an RCC or Coast station to only hear communications from the vessel actually in distress.
Correct answer: B, Answers a) and c) are both correct.
Explanation
47 CFR § 80.369 names the six MF/HF distress and safety voice frequencies: 2182, 4125, 6215, 8291, 12290 and 16420 kHz. Each is used simplex, meaning both sides transmit on the same frequency. Ships without GMDSS can then guard known channels and hear both sides of the traffic. GMDSS ships know where to tune after receiving a DSC call of the matching priority. Both reasons are true.
Why the other answers are wrong
- A, For non-GMDSS ships, to maximize the chances for other vessels to receive those communications.: This is true for ships without GMDSS, but it is only half the answer. The same reasoning also applies to DSC-equipped ships after a DSC call.
- C, For GMDSS or DSC-equipped ships, to maximize the chances for other vessels to receive those communications following the transmission of a DSC call of the correct priority.: This is true for GMDSS and DSC-equipped ships, but it is only half the answer. It also applies to ships without GMDSS that keep a voice watch.
- D, To enable an RCC or Coast station to only hear communications from the vessel actually in distress.: The aim is the opposite. Other ships and stations should be able to hear the distress traffic so they can relay it and help.