Element 1 Question 1-15C5
C1C15: MF-HF Equipment Controls
To set-up the MF/HF transceiver for a TELEX call to a coast station, the operator must:
- Select J3E mode for proper SITOR operations.
- Select F1B mode or J2B mode, depending on the equipment manufacturer. (correct answer)
- Select F1B/J2B modes or J3E mode, depending on whether ARQ or FEC is preferred.
- None of the above.
Correct answer: B, Select F1B mode or J2B mode, depending on the equipment manufacturer.
Explanation
A TELEX (SITOR/NBDP) link is a narrow-band direct-printing data mode, not voice. A radio produces it in one of two ways. F1B keys the carrier directly by frequency shift. J2B sends audio tones from the modem through the SSB transmitter. Which one you select depends on how the manufacturer built the set. 47 CFR 80.361 lists F1B and J2B as NBDP emissions, and both ARQ and FEC run on them.
Why the other answers are wrong
- A, Select J3E mode for proper SITOR operations.: J3E is single-sideband voice (radiotelephony). SITOR/TELEX is a data mode sent as F1B or J2B, not by talking over an SSB voice channel.
- C, Select F1B/J2B modes or J3E mode, depending on whether ARQ or FEC is preferred.: ARQ (linked and error-checked) and FEC (broadcast) are both SITOR modes sent as F1B or J2B. Neither uses J3E voice, so choosing ARQ or FEC doesn't change the emission.
- D, None of the above.: One of the choices is correct: you set the transceiver for TELEX by selecting F1B or J2B, depending on how the radio is designed.