Element 1 Question 1-1A5
C1A01: Equipment Requirements
What is the minimum transmitter power level required by the FCC for a medium-frequency transmitter aboard a compulsorily fitted vessel?
- At least 100 watts, single-sideband, suppressed-carrier power.
- At least 60 watts PEP. (correct answer)
- The power predictably needed to communicate with the nearest public coast station operating on 2182 kHz.
- At least 25 watts delivered into 50 ohms effective resistance when operated with a primary voltage of 13.6 volts DC.
Correct answer: B, At least 60 watts PEP.
Explanation
A compulsory ship's MF radiotelephone must send clearly perceptible signals ship-to-ship over 150 nautical miles in daytime. Under 47 CFR 80.855, it meets that range requirement if it can be matched to a proper ship antenna and its output is at least 60 W peak envelope power. PEP is the right measure because MF voice uses single sideband (J3E/H3E), which is rated by peak envelope power rather than carrier power.
Why the other answers are wrong
- A, At least 100 watts, single-sideband, suppressed-carrier power.: 100 W is not the Part 80 figure. The rule sets the minimum at 60 W PEP to meet the 150 nautical mile daytime range requirement.
- C, The power predictably needed to communicate with the nearest public coast station operating on 2182 kHz.: The rule doesn't use a vague "power needed" standard tied to coast stations. It sets a fixed minimum of 60 W PEP.
- D, At least 25 watts delivered into 50 ohms effective resistance when operated with a primary voltage of 13.6 volts DC.: This confuses MF with VHF rules. 25 W is the VHF ship carrier-power ceiling, and 12–13.7 V battery testing applies to VHF radios, not MF minimum power.