Element 1 Question 1-22D6
C1D22: SARTs
How can a SART’s effective range be maximized?
- The SART should be placed in water immediately upon activation.
- The SART should be held as high as possible. (correct answer)
- Switch the SART into the “high” power position.
- If possible, the SART should be mounted horizontally so that its signal matches that of the searching RADAR signal.
Correct answer: B, The SART should be held as high as possible.
Explanation
9 GHz signals travel by line of sight, so a SART's range depends on how high both its antenna and the searching radar's antenna are. Holding it up or mounting it on its pole at least 1 m above the sea greatly extends the range: about 5 nautical miles to a typical ship radar, and much farther to a searching aircraft. Held low, the SART's signal is blocked by waves.
Why the other answers are wrong
- A, The SART should be placed in water immediately upon activation.: In the water the antenna sits at wave level, where swells block the line-of-sight signal, so the range drops sharply.
- C, Switch the SART into the “high” power position.: A SART has no selectable power setting. Its output is fixed, so raising it higher is the practical way to gain range.
- D, If possible, the SART should be mounted horizontally so that its signal matches that of the searching RADAR signal.: There is no polarization for the user to match. The SART is meant to stand upright on its pole, and laying it on its side only lowers and distorts its coverage.