Element 3 Question 3-26C5
C3C26: Transistors-2
For current to flow in an NPN silicon transistor’s emitter-collector junction, the base must be:
- At least 0.4 volts positive with respect to the emitter.
- At a negative voltage with respect to the emitter.
- At least 0.7 volts positive with respect to the emitter. (correct answer)
- At least 0.7 volts negative with respect to the emitter.
Correct answer: C, At least 0.7 volts positive with respect to the emitter.
Explanation
A silicon PN junction needs about 0.6-0.7 V of forward bias before it conducts significantly. In an NPN transistor the base is P-type and the emitter is N-type. The base must therefore be about 0.7 V positive relative to the emitter for base current, and so collector-emitter current, to flow. Germanium devices need only about 0.2-0.3 V.
Why the other answers are wrong
- A, At least 0.4 volts positive with respect to the emitter.: 0.4 V is below the silicon barrier potential. A silicon base-emitter junction conducts very little until about 0.6-0.7 V.
- B, At a negative voltage with respect to the emitter.: A base negative to the emitter reverse biases an NPN base-emitter junction and cuts the transistor off. That polarity turns on a PNP.
- D, At least 0.7 volts negative with respect to the emitter.: The magnitude is right but the polarity is wrong for NPN. A base 0.7 V negative to the emitter is how a silicon PNP is turned on.