Element 3 Question 3-27C4
C3C27: Light Emitting Diodes
What would be the maximum current to safely illuminate a LED?
- 1 amp.
- 1 microamp.
- 500 milliamps.
- 20 mA. (correct answer)
Correct answer: D, 20 mA.
Explanation
A standard indicator LED is rated for a continuous forward current of about 20 mA. Above that, junction heating dims and then destroys it. An LED's forward voltage stays nearly constant, so current is set by the external circuit. Size a series resistor so the current stays at or below about 20 mA, e.g. R = (5 V − 2 V) / 0.020 A = 150 Ω.
Why the other answers are wrong
- A, 1 amp.: 1 A is about fifty times a small LED's rating and would burn out the junction almost instantly. Only special high-power lighting LEDs on heat sinks handle currents near this.
- B, 1 microamp.: 1 µA is far too little current. The LED would be safe but would give little or no visible light, so this is not its maximum safe operating current.
- C, 500 milliamps.: 500 mA is about 25 times the rating of a typical indicator LED. It confuses milliamps with a much smaller figure, or confuses a small LED with a power LED.