Element 3 Question 3-28C2
C3C28: Devices
Why are special precautions necessary in handling FET and CMOS devices?
- They have fragile leads that may break off.
- They are susceptible to damage from static charges. (correct answer)
- They have micro-welded semiconductor junctions that are susceptible to breakage.
- They are light sensitive.
Correct answer: B, They are susceptible to damage from static charges.
Explanation
FETs and CMOS devices have an extremely thin insulating oxide layer under the gate. Their input impedance is so high that static charge from a person or tool cannot bleed off, so the voltage builds up. A few hundred volts of electrostatic discharge can punch through the oxide and ruin the device. Use a grounded wrist strap, an antistatic mat and conductive packaging, and keep the leads shorted until the part is installed.
Why the other answers are wrong
- A, They have fragile leads that may break off.: Lead breakage can happen to any component and is not the special hazard. The precautions taken with FETs and CMOS target static, not mechanical damage.
- C, They have micro-welded semiconductor junctions that are susceptible to breakage.: Microscopic bonds inside the package are well protected. The real vulnerability is the thin gate oxide being punctured by static voltage.
- D, They are light sensitive.: Ordinary FETs and CMOS chips sit in opaque packages and are not light sensitive. Light sensitivity applies to photodiodes and phototransistors.