Element 3 Question 3-30D4
C3D30: Op Amps
Where is the external feedback network connected to control the gain of a closed-loop op-amp circuit?
- Between the differential inputs.
- From output to the non-inverting input.
- From output to the inverting input. (correct answer)
- Between the output and the differential inputs.
Correct answer: C, From output to the inverting input.
Explanation
The feedback resistor runs from the output back to the inverting (−) input, which gives negative feedback. Any rise in output pulls the − input up and shrinks the difference between the inputs. This holds the gain at the resistor ratio. Inverting and non-inverting amplifiers both use this connection; they differ only in which input the signal drives.
Why the other answers are wrong
- A, Between the differential inputs.: A component placed between the two inputs does not connect to the output, so it cannot feed the output back to control gain.
- B, From output to the non-inverting input.: Feedback to the non-inverting input is positive feedback. It causes latching, hysteresis (a Schmitt trigger) or oscillation, not stable gain.
- D, Between the output and the differential inputs.: Gain-setting feedback goes only to the inverting input. Tying the output to both inputs would cancel the differential signal.