Element 3 Question 3-31D5
C3D31: Phase Locked Loops (PLLs); Voltage Controlled Oscillators (VCOs); Mixers
In a direct digital synthesizer, what are the unwanted components on its output?
- Broadband noise.
- Spurs at discrete frequencies. (correct answer)
- Digital conversion noise.
- Nyquist limit noise pulses.
Correct answer: B, Spurs at discrete frequencies.
Explanation
A direct digital synthesizer builds its sine wave from a phase accumulator, a sine lookup table and a DAC. Phase truncation, amplitude quantization and DAC nonlinearity are repeating errors, so they show up as spurious tones (spurs) at specific discrete frequencies, not as a smooth noise floor. Spur-free dynamic range (SFDR) is therefore a key DDS specification.
Why the other answers are wrong
- A, Broadband noise.: Broadband noise is spread smoothly across the spectrum. A DDS's typical impurities come from periodic errors that concentrate their energy at discrete spur frequencies.
- C, Digital conversion noise.: 'Digital conversion noise' is not a standard DDS term. Quantization errors in a DDS repeat with the phase cycle, so they appear as discrete spurs rather than as random noise.
- D, Nyquist limit noise pulses.: There is no such thing as 'Nyquist limit noise pulses.' Exceeding the Nyquist limit produces alias images, which are themselves discrete spurs, not pulses of noise.