Element 3 Question 3-32D2
C3D32: Schematics
Which lamps would be lit in the circuit shown in Figure 3D8?
- 2, 3, 4, 5 and 6.
- 5, 6, 8 and 9.
- 2, 3, 4, 7 and 8. (correct answer)
- 1, 3, 5, 7 and 8.
Correct answer: C, 2, 3, 4, 7 and 8.
Explanation
Trace current from the battery's + side (top rail) to its − side (bottom rail). A lamp lights only if its path passes through every diode from anode to cathode. Lit paths: LP-3 → LP-2 → the forward-biased lower-left diode; LP-4 → its downward-pointing diode; LP-7 → LP-8 → the forward-biased lower-right diode. The paths for LP-1, LP-5/LP-6 and LP-9 each run into a reverse-biased diode.
Why the other answers are wrong
- A, 2, 3, 4, 5 and 6.: LP-5 and LP-6 can't light. The diode under LP-6 points toward the + rail (reverse biased), and the horizontal diode blocks current from flowing over to the LP-8 side.
- B, 5, 6, 8 and 9.: LP-5 and LP-6 are blocked by reverse-biased diodes, and LP-9 sits behind the top-right diode, which blocks current flowing from LP-7. This choice also misses LP-2, LP-3 and LP-4.
- D, 1, 3, 5, 7 and 8.: Current through LP-1 would have to pass through the top-left diode from cathode to anode, so LP-1 stays dark. LP-5 is blocked as well, and this choice leaves out LP-2 and LP-4.