Element 3 Question 3-35E5
C3E35: Logic Levels
Given the input levels shown in Figure 3E14 and assuming positive logic devices, what would the output be?
- A is low, B is high and C is high.
- A is high, B is high and C is low. (correct answer)
- A is low, B is low and C is high.
- None of the above are correct.
Correct answer: B, A is high, B is high and C is low.
Explanation
If the open XOR input is taken as logic low (no applied voltage), A = H XOR L = high, because an XOR output is high when its inputs differ. The inverter turns the lower H into L, so B = NAND(L, L) = high. The output NAND then has two high inputs, so C = NAND(H, H) = low. That gives A high, B high, C low.
Why the other answers are wrong
- A, A is low, B is high and C is high.: This treats the open input as high, which is how a floating TTL input behaves. The XOR then sees H, H and gives A low, which in turn makes C high.
- C, A is low, B is low and C is high.: B can't be low: a NAND with low inputs always outputs high. And with A taken as high, C would be low.
- D, None of the above are correct.: The listed set 'A high, B high, C low' follows from the gate logic, so 'none of the above' is wrong.