Element 3 Question 3-36E6
C3E36: Flip-Flops
An R-S flip-flop is capable of doing all of the following except:
- Accept data input into R-S inputs with CLK initiated.
- Accept data input into PRE and CLR inputs without CLK being initiated.
- Refuse to accept synchronous data if asynchronous data is being input at same time.
- Operate in toggle mode with R-S inputs held constant and CLK initiated. (correct answer)
Correct answer: D, Operate in toggle mode with R-S inputs held constant and CLK initiated.
Explanation
An R-S flip-flop has no toggle mode. With R and S held constant and the clock pulsing, it simply sets, resets, or holds. The S = R = 1 input is forbidden because the result is invalid or indeterminate. Toggling on every clock pulse is a feature of the J-K flip-flop (J = K = 1) or the T flip-flop. A clocked R-S flip-flop can perform the other three listed functions.
Why the other answers are wrong
- A, Accept data input into R-S inputs with CLK initiated.: A clocked R-S flip-flop does this as normal operation: it reads the R and S inputs when the clock is active.
- B, Accept data input into PRE and CLR inputs without CLK being initiated.: Preset (PRE) and clear (CLR) are asynchronous inputs. They force Q to 1 or 0 immediately, with no clock edge required, so this is something it can do.
- C, Refuse to accept synchronous data if asynchronous data is being input at same time.: Asynchronous PRE and CLR inputs override synchronous clocked data, so when both arrive together the clocked data is ignored. This is normal behavior.