Element 3 Question 3-3A4
C3A03: Materials
Skin effect is the phenomenon where:
- RF current flows in a thinner layer of the conductor, closer to the surface, as frequency increases. (correct answer)
- RF current flows in a thinner layer of the conductor, closer to the surface, as frequency decreases.
- Thermal effects on the surface of the conductor increase the impedance.
- Thermal effects on the surface of the conductor decrease the impedance.
Correct answer: A, RF current flows in a thinner layer of the conductor, closer to the surface, as frequency increases.
Explanation
At RF, changing magnetic flux inside a conductor pushes current outward toward the surface. Skin depth shrinks as 1/√f, so the higher the frequency, the thinner the layer that carries current. This raises a wire's effective AC resistance. It is why RF conductors use silver plating, Litz wire or hollow tubing.
Why the other answers are wrong
- B, RF current flows in a thinner layer of the conductor, closer to the surface, as frequency decreases.: This reverses the relationship. Lower frequency gives a deeper skin depth, and at DC current uses the whole cross-section.
- C, Thermal effects on the surface of the conductor increase the impedance.: Skin effect is caused by electromagnetic induction inside the conductor, not by heating of its surface.
- D, Thermal effects on the surface of the conductor decrease the impedance.: Skin effect is not thermal, and it raises a conductor's effective resistance rather than lowering it.