Element 3 Question 3-40E1
C3E40: Counters, Dividers, Converters
What is the purpose of a prescaler circuit?
- Converts the output of a JK flip-flop to that of an RS flip-flop.
- Multiplies an HF signal so a low-frequency counter can display the operating frequency.
- Prevents oscillation in a low frequency counter circuit.
- Divides an HF signal so that a low-frequency counter can display the operating frequency. (correct answer)
Correct answer: D, Divides an HF signal so that a low-frequency counter can display the operating frequency.
Explanation
A prescaler is a fast frequency divider placed ahead of a slower counter. It divides by a fixed ratio such as ÷10 or ÷100. For example, a 150 MHz signal ÷ 10 = 15 MHz, which a counter limited to tens of MHz can handle. The reading is then scaled back up by the same factor, so the display still shows the true operating frequency.
Why the other answers are wrong
- A, Converts the output of a JK flip-flop to that of an RS flip-flop.: Converting between flip-flop types is a logic-design matter, not frequency scaling. A prescaler divides the input frequency.
- B, Multiplies an HF signal so a low-frequency counter can display the operating frequency.: Multiplying an HF signal would push it even further beyond a low-frequency counter's range. A prescaler divides it instead.
- C, Prevents oscillation in a low frequency counter circuit.: Preventing oscillation is a stability or bypassing issue. A prescaler's job is reducing the input frequency to a countable rate.