Element 3 Question 3-43F6
C3F43: Oscillators
In Figure 3F15, which block diagram symbol (labeled 1 through 4) is used to represent a local oscillator?
- 1
- 2 (correct answer)
- 3
- 4
Correct answer: B, 2
Explanation
In a superheterodyne receiver the local oscillator generates a steady RF signal and feeds it into the mixer. In Figure 3F15 that is the plain circle at 2, whose arrow points up into the mixer at 1. The mixer combines the incoming signal with the oscillator output and sends their difference, the intermediate frequency (IF), on to the IF amplifiers. A plain circle feeding a mixer is the usual block-diagram symbol for an oscillator.
Why the other answers are wrong
- A, 1: Block 1, the circle with an X, is the mixer. It receives the local oscillator signal but does not generate it.
- C, 3: Block 3 sits after the IF amplifiers and feeds the audio stage and the AGC, so it is the detector, not an oscillator.
- D, 4: Block 4 is labeled AGC. It sends a control voltage back to the IF amplifiers and does not generate a frequency for the mixer.