Element 3 Question 3-45F1
C3F45: IF Amplifiers
What degree of selectivity is desirable in the IF circuitry of a wideband FM phone receiver?
- 1 kHz.
- 2.4 kHz.
- 4.2 kHz.
- 15 kHz. (correct answer)
Correct answer: D, 15 kHz.
Explanation
IF selectivity should match the bandwidth the signal occupies. Two-way FM phone with ±5 kHz deviation and audio up to about 3 kHz occupies roughly 2 × (5 + 3) = 16 kHz by Carson's rule. An IF bandwidth near 15 kHz passes that signal without clipping its sidebands while rejecting adjacent channels. The narrower choices suit CW, SSB or AM and would distort FM.
Why the other answers are wrong
- A, 1 kHz.: A bandwidth of 1 kHz or less suits CW (Morse). It would pass only a sliver of an FM signal and badly distort it.
- B, 2.4 kHz.: 2.4 kHz is the typical IF bandwidth for SSB voice, which uses one sideband. FM with ±5 kHz deviation needs several times this.
- C, 4.2 kHz.: About 4 to 6 kHz fits AM voice with its two sidebands. It is still far too narrow for an FM phone signal with ±5 kHz deviation.