Element 3 Question 3-48F2
C3F48: Detectors
Which circuit is used to detect FM-phone signals?
- Balanced modulator.
- Frequency discriminator. (correct answer)
- Product detector.
- Phase splitter.
Correct answer: B, Frequency discriminator.
Explanation
FM carries its information as changes in frequency, so the detector must turn frequency deviation into a varying voltage. A frequency discriminator does exactly that. Its output swings positive or negative as the signal moves above or below the IF center frequency, and that swing becomes the audio. Ratio detectors, quadrature detectors and PLL detectors do the same job.
Why the other answers are wrong
- A, Balanced modulator.: A balanced modulator is a transmitter circuit. It produces a DSB suppressed-carrier signal for SSB generation and does not detect FM.
- C, Product detector.: A product detector demodulates SSB and CW by mixing in a local carrier. It responds to amplitude and phase, not to FM deviation.
- D, Phase splitter.: A phase splitter produces two out-of-phase copies of a signal, for example to drive a push-pull stage. It is not a detector.