Element 3 Question 3-48F6
C3F48: Detectors
What is the definition of detection in a radio receiver?
- The process of masking out the intelligence on a received carrier to make an S-meter operational.
- The recovery of intelligence from the modulated RF signal. (correct answer)
- The modulation of a carrier.
- The mixing of noise with the received signal.
Correct answer: B, The recovery of intelligence from the modulated RF signal.
Explanation
Detection, or demodulation, means recovering the original intelligence (voice, tones or data) from a modulated RF signal. Each mode needs a suitable detector. AM uses an envelope detector, SSB and CW use a product detector, and FM uses a discriminator. Detection is the reverse of the modulation done at the transmitter.
Why the other answers are wrong
- A, The process of masking out the intelligence on a received carrier to make an S-meter operational.: An S-meter reads signal strength, usually from AGC voltage. Detection recovers the intelligence; it does not mask it out.
- C, The modulation of a carrier.: Modulating a carrier is what the transmitter does. Detection is the opposite process at the receiver.
- D, The mixing of noise with the received signal.: Mixing noise with the signal would corrupt it. Detection pulls the wanted intelligence out of the signal.