Element 3 Question 3-49F2

C3F49: Audio & Squelch Circuits

What is the purpose of de-emphasis in the receiver audio stage?

  1. When coupled with the transmitter pre-emphasis, flat audio is achieved.
  2. When coupled with the transmitter pre-emphasis, flat audio and noise reduction is received. (correct answer)
  3. No purpose is achieved.
  4. To conserve bandwidth by squelching no-audio periods in the transmission.

Correct answer: B, When coupled with the transmitter pre-emphasis, flat audio and noise reduction is received.

Explanation

FM receiver noise gets stronger as audio frequency rises. To counter this, the transmitter's pre-emphasis boosts the high audio frequencies, typically by 6 dB per octave. The receiver's de-emphasis network rolls the highs back off by the same amount, which restores a flat overall response. The same roll-off also cuts the high-frequency hiss, improving the signal-to-noise ratio.

Why the other answers are wrong

Previous: 3-49F1 · All Element 3 questions · Next: 3-49F3

Practice C3F Receivers