Element 3 Question 3-55G5
C3G55: SSB Transmitters
What is the output peak envelope power from a transmitter as measured on an oscilloscope showing 200 volts peak-to-peak across a 50-ohm load resistor?
- 1,000 watts.
- 100 watts. (correct answer)
- 200 watts.
- 400 watts.
Correct answer: B, 100 watts.
Explanation
PEP uses the RMS value of the envelope at its peak. Vpk = 200 V p-p / 2 = 100 V, and Vrms = 100 V × 0.707 = 70.7 V. Then PEP = Vrms² / R = (70.7 V)² / 50 Ω ≈ 5,000 / 50 = 100 W.
Why the other answers are wrong
- A, 1,000 watts.: 1,000 W is ten times too high, likely a decimal-place slip. The correct working gives 70.7² / 50 = 100 W.
- C, 200 watts.: 200 W comes from using peak voltage without converting to RMS: 100² / 50 = 200 W. Power needs the RMS voltage.
- D, 400 watts.: 400 W comes from treating 200 V p-p as the peak value. Halve it to 100 V peak first, then convert to RMS.