Element 3 Question 3-56G1
C3G56: Technology
How can intermodulation interference between two transmitters in close proximity often be reduced or eliminated?
- By using a Class C final amplifier with high driving power.
- By installing a terminated circulator or ferrite isolator in the feed line to the transmitter and duplexer. (correct answer)
- By installing a band-pass filter in the antenna feed line.
- By installing a low-pass filter in the antenna feed line.
Correct answer: B, By installing a terminated circulator or ferrite isolator in the feed line to the transmitter and duplexer.
Explanation
Intermodulation between nearby transmitters happens when one station's signal couples back into the other's final amplifier. There the non-linear stage mixes the two signals and radiates new products. A terminated ferrite circulator or isolator passes outgoing power to the antenna and duplexer. It routes any incoming signal into a dummy-load termination, so the energy never reaches the amplifier to be mixed.
Why the other answers are wrong
- A, By using a Class C final amplifier with high driving power.: A Class C amplifier with heavy drive is highly non-linear, so it mixes stray signals more readily and makes intermodulation worse.
- C, By installing a band-pass filter in the antenna feed line.: Co-sited transmitters are often close in frequency, so the other signal falls inside a band-pass filter's passband and still reaches the final.
- D, By installing a low-pass filter in the antenna feed line.: A low-pass filter removes harmonics above the operating band but passes a nearby transmitter's signal, so it cannot stop the mixing.