Element 3 Question 3-5A3
C3A05: Semi-conductors
MOSFETs are manufactured with THIS protective device built into their gate to protect the device from static charges and excessive voltages:
- Schottky diode.
- Metal oxide varistor (MOV).
- Zener diode. (correct answer)
- Tunnel diode.
Correct answer: C, Zener diode.
Explanation
A MOSFET gate is insulated from the channel by an extremely thin oxide layer. Static discharge or overvoltage can puncture that layer and destroy the device. Many MOSFETs therefore include Zener diodes between gate and source. The Zeners conduct at a set voltage and clamp the gate below the oxide's breakdown point. Even protected devices should be handled with antistatic precautions.
Why the other answers are wrong
- A, Schottky diode.: A Schottky diode is a fast, low-drop rectifier. It is not the voltage-clamping element built into MOSFET gates.
- B, Metal oxide varistor (MOV).: A MOV is a discrete surge suppressor for power lines. It is not integrated into a transistor gate.
- D, Tunnel diode.: A tunnel diode uses negative resistance for oscillators and switching. It does not clamp voltage to protect a gate oxide.