Element 3 Question 3-64J2
C3J64: Voltage, Current and Power Relationships
The voltage produced in a receiving antenna is:
- Out of phase with the current if connected properly.
- Out of phase with the current if cut to 1/3 wavelength.
- Variable depending on the station’s SWR.
- Always proportional to the received field strength. (correct answer)
Correct answer: D, Always proportional to the received field strength.
Explanation
A passing wave induces a voltage in a receiving antenna equal to the field strength times the antenna's effective length: V = E × h_eff. For a given antenna, the induced voltage scales directly with the field strength. Double the field in µV/m and you double the induced µV. That is why field strength sets received signal level.
Why the other answers are wrong
- A, Out of phase with the current if connected properly.: The voltage-current phase depends on the antenna's reactance, set by its length relative to the wavelength. It has nothing to do with being connected properly.
- B, Out of phase with the current if cut to 1/3 wavelength.: A 1/3-wavelength cut has no special significance that sets a fixed phase relationship between voltage and current.
- C, Variable depending on the station’s SWR.: SWR affects how much received power transfers to the receiver. The voltage induced in the antenna depends on the incoming field.