Element 3 Question 3-68K4
C3K68: Distance Measuring Equipment
What is the main underlying operating principle of an aircraft’s Distance Measuring Equipment (DME)?
- A measurable amount of time is required to send and receive a radio signal through the Earth’s atmosphere. (correct answer)
- The difference between the peak values of two DC voltages may be used to determine an aircraft’s distance to another aircraft.
- A measurable frequency compression of an AC signal may be used to determine an aircraft’s altitude above the earth.
- A phase inversion between two AC voltages may be used to determine an aircraft’s distance to the exit ramp of an airport’s runway.
Correct answer: A, A measurable amount of time is required to send and receive a radio signal through the Earth’s atmosphere.
Explanation
DME is a pulse-timing system. The aircraft sends an interrogation pulse pair, the ground station replies after a fixed delay, and the airborne unit measures the total elapsed time. Radio waves travel at a known speed, so a round trip takes about 12.36 µs per nautical mile. Distance = (elapsed time − 50 µs) ÷ 12.36 µs/NM.
Why the other answers are wrong
- B, The difference between the peak values of two DC voltages may be used to determine an aircraft’s distance to another aircraft.: DME doesn't compare DC voltage peaks. It also measures distance to a ground station, not to another aircraft, which is a job for collision-avoidance systems such as TCAS.
- C, A measurable frequency compression of an AC signal may be used to determine an aircraft’s altitude above the earth.: Frequency shift is the principle of FM radar altimeters, not DME. DME measures elapsed time and gives slant range to a station, not altitude.
- D, A phase inversion between two AC voltages may be used to determine an aircraft’s distance to the exit ramp of an airport’s runway.: Phase comparison is how a VOR finds bearing, using its 30 Hz signals, not how distance is measured. No navaid gives distance to a runway exit ramp.