Element 3 Question 3-6A4
C3A06: Electrical Measurements
What is the easiest voltage amplitude to measure by viewing a pure sine wave signal on an oscilloscope?
- Peak-to-peak. (correct answer)
- RMS.
- Average.
- DC.
Correct answer: A, Peak-to-peak.
Explanation
On an oscilloscope you can read peak-to-peak directly: count graticule divisions from the top of the trace to the bottom and multiply by the volts/div setting. You don't need to find the zero baseline first. RMS and average values are not drawn on the screen. You must calculate them from the peak (RMS = 0.707 × peak; average = 0.637 × peak).
Why the other answers are wrong
- B, RMS.: RMS is not visible on the trace. You must first find the peak and then multiply by 0.707.
- C, Average.: The half-cycle average must be calculated as 0.637 × peak, and a full sine cycle averages to zero, so the screen shows neither directly.
- D, DC.: A pure sine wave has no DC component. DC is an offset, not a way of measuring the sine's amplitude.