Element 3 Question 3-72K2
C3K72: Aircraft Antenna Systems and Frequencies
What type of antenna is used in an aircraft’s Instrument Landing System (ILS) marker beacon installation?
- An electronically steerable phased-array antenna that radiates a directional antenna pattern.
- A folded dipole reception antenna.
- A balanced loop reception antenna. (correct answer)
- A horizontally polarized antenna that radiates an omnidirectional antenna pattern.
Correct answer: C, A balanced loop reception antenna.
Explanation
Marker beacon ground stations radiate a narrow vertical pattern on 75 MHz (47 CFR 87.475(b)(3)). The aircraft only has to sense when it passes through that beam. Its antenna therefore receives only: a balanced loop in a low-profile housing on the belly, facing down toward the beacon. Because it is balanced, it picks up the downward signal well and rejects common-mode noise from the airframe.
Why the other answers are wrong
- A, An electronically steerable phased-array antenna that radiates a directional antenna pattern.: Electronically steerable phased arrays belong to transmitting systems such as TCAS or ground interrogators, not to a simple 75 MHz receiver.
- B, A folded dipole reception antenna.: A folded dipole is the usual type for other receivers, such as the glideslope antenna in the nose. It is not the standard marker beacon antenna.
- D, A horizontally polarized antenna that radiates an omnidirectional antenna pattern.: The aircraft's marker antenna doesn't radiate at all; it only receives. The ground beacon's pattern is a vertical fan aimed upward, not an omnidirectional one.