Element 3 Question 3-81L6
C3L81: Troubleshooting
What steps must be taken to activate the DSC emergency signaling function on a marine VHF?
- Separate 12 volts to the switch.
- Secondary DSC transmit antenna.
- GPS position input.
- Input of registered 9-digit MMSI. (correct answer)
Correct answer: D, Input of registered 9-digit MMSI.
Explanation
A DSC radio identifies the vessel by its Maritime Mobile Service Identity. Until a registered 9-digit MMSI is entered, the radio won't send DSC calls, including distress alerts. FCC Part 80 rules require ship DSC equipment to be programmed with an assigned MMSI, so a rescue center can look up who is in distress.
Why the other answers are wrong
- A, Separate 12 volts to the switch.: The DSC function runs on the radio's normal power supply. No separate 12 V feed to the distress switch is needed.
- B, Secondary DSC transmit antenna.: DSC on channel 70 transmits through the radio's normal VHF antenna. A second antenna isn't required.
- C, GPS position input.: GPS input is strongly recommended so alerts include position, but a distress alert can still be sent without it. The MMSI is what enables DSC.