Element 3 Question 3-85N6
C3N85: VHF
How might an installer verify correct GPS sentence to marine DSC VHF radio?
- Look for latitude and longitude, plus speed, on VHF display. (correct answer)
- Press and hold the red distress button.
- Look for GPS confirmation readout.
- Ask for VHF radio check position report.
Correct answer: A, Look for latitude and longitude, plus speed, on VHF display.
Explanation
A DSC VHF radio gets position data from the GPS as NMEA 0183 sentences (such as RMC or GGA) over a data wire. If the wiring and sentence format are correct, the radio shows live latitude, longitude and usually speed and time. That data goes into every DSC distress alert. Seeing a live position on the VHF display shows the GPS feed is good.
Why the other answers are wrong
- B, Press and hold the red distress button.: Holding the red distress button sends a real DSC distress alert. That is a false alert, not an installation check.
- C, Look for GPS confirmation readout.: No standard "GPS confirmation readout" exists. The proof is the radio showing the position it receives, not a generic status message.
- D, Ask for VHF radio check position report.: A voice radio check only tests transmit and receive audio. It tells you nothing about whether GPS data is reaching the radio's DSC controller.