Element 3 Question 3-87N1
C3N87: Survival Craft Equipment: VHF, SARTs & EPIRBs
What causes the SART to begin a transmission?
- When activated manually, it begins radiating immediately.
- After being activated the SART responds to radar interrogation. (correct answer)
- It is either manually or water activated before radiating.
- It begins radiating only when keyed by the operator.
Correct answer: B, After being activated the SART responds to radar interrogation.
Explanation
A radar SART doesn't transmit all the time. Turning it on, by hand or by floating free, only puts it into standby, where it listens for radar pulses. When a 9 GHz (X-band) search radar's pulse reaches it, the SART sends back a reply. That way the battery lasts much longer in standby. Under 47 CFR 80.1129, its locating signals fall in the 9200-9500 MHz band.
Why the other answers are wrong
- A, When activated manually, it begins radiating immediately.: Turning the SART on only puts it in standby. It stays silent until a 9 GHz radar pulse reaches it, so it does not start radiating straight away.
- C, It is either manually or water activated before radiating.: Water or manual activation only arms the SART. Being switched on is not enough: a radar pulse is what triggers each reply.
- D, It begins radiating only when keyed by the operator.: A SART has no transmit key or microphone. Once armed, it replies automatically when a radar pulse arrives, not when an operator keys it.