Element 3 Question 3-88N3
C3N88: FAX, NAVTEX
What would be the bandwidth of a good crystal lattice band-pass filter for weather facsimile HF (high frequency) reception?
- 500 Hz at -6 dB.
- 6 kHz at -6 dB.
- 1 kHz at -6 dB. (correct answer)
- 15 kHz at -6 dB.
Correct answer: C, 1 kHz at -6 dB.
Explanation
HF weather fax is sent as frequency-shift keying with a total shift of 800 Hz (±400 Hz around center), giving a picture signal of under about 1 kHz. A crystal lattice filter about 1 kHz wide at the -6 dB points passes the black and white tones. It keeps the noise and adjacent-channel interference down. If the filter is any narrower, it starts to cut off the extreme tones and the picture smears.
Why the other answers are wrong
- A, 500 Hz at -6 dB.: 500 Hz is a CW-type filter width. It is narrower than the 800 Hz fax shift, so it would weaken the tones at the black and white extremes and degrade the picture.
- B, 6 kHz at -6 dB.: 6 kHz is an AM voice bandwidth. It is far wider than the fax signal needs, so it lets in extra noise and nearby signals with no benefit.
- D, 15 kHz at -6 dB.: 15 kHz suits wideband FM or broadcast audio, not an 800 Hz-shift HF fax signal. A filter this wide would admit a great deal of noise and interference.