Element 3 Question 3-89N5
C3N89: NMEA Data
An NMEA 2000 system with devices in a single location may be powered using this method:
- Dual mid-powered network.
- End-powered network. (correct answer)
- Individual devices individually powered.
- No 12 volts needed for NMEA 2000 devices.
Correct answer: B, End-powered network.
Explanation
An NMEA 2000 backbone carries 12 V DC power along with the data, fed in through a power tap. When all devices are grouped in one location, the cable runs are short and the voltage drop stays small. One power tap at one end of the backbone (an end-powered network) is then enough. Power is fed in near the middle (mid-powered) only when the loads are spread along a long backbone.
Why the other answers are wrong
- A, Dual mid-powered network.: Mid-powering is for long backbones with loads spread along them, to cut the voltage drop each way. Devices grouped in one place need nothing more than a single end feed.
- C, Individual devices individually powered.: Devices on an NMEA 2000 network draw their interface power from the backbone, so you power the network itself, not each device on its own.
- D, No 12 volts needed for NMEA 2000 devices.: NMEA 2000 needs DC power on the backbone, a nominal 12 V supply that devices can use from about 9 V to 16 V, so saying no 12 V is needed is false.