Element 3 Question 3-91O4
C3O91: Components
What is the purpose of a synchro transmitter and receiver?
- Synchronizes the transmitted and received pulse trains.
- Prevents the receiver from operating during the period of the transmitted pulse.
- Transmits the angular position of the antenna to the indicator unit. (correct answer)
- Keeps the speed of the motor generator constant.
Correct answer: C, Transmits the angular position of the antenna to the indicator unit.
Explanation
A synchro (selsyn) pair is an electromechanical link for sending an angle. The synchro transmitter is geared to the rotating antenna and sends its shaft position over three stator wires. The synchro receiver in the indicator turns to match it. This keeps the PPI sweep line aligned with where the antenna actually points, so echoes are painted at the correct bearing.
Why the other answers are wrong
- A, Synchronizes the transmitted and received pulse trains.: Pulse timing is set by the trigger (timer) circuit that fires the modulator and starts the display sweep. A synchro carries shaft angle, not pulse timing.
- B, Prevents the receiver from operating during the period of the transmitted pulse.: Blocking the receiver during the transmitted pulse is the job of the TR switch (duplexer), not a synchro.
- D, Keeps the speed of the motor generator constant.: Holding a motor-generator's speed constant is done by a speed regulator or governor. A synchro reports angular position, not speed.