Element 3 Question 3-92O6
C3O92: Range, Pulse Width & Repetition Rate
When a RADAR is being operated on the 1.5 mile range setting, what is the most appropriate pulse width and pulse repetition rate?
- 0.25 s PW and 1,000 pps.
- 0.05 s PW and 2,000 pps. (correct answer)
- 1.0 s PW and 500 pps.
- 2.5 s PW and 2,500 pps.
Correct answer: B, 0.05 s PW and 2,000 pps.
Explanation
On short ranges, a radar uses its shortest pulse and highest repetition rate. A very short pulse (0.05 µs) gives fine range resolution and a small minimum range, so close targets are separated. A high rate of 2,000 pps puts more hits on each target per sweep. The echoes still return in time: 1 / 2,000 pps = 500 µs, which covers about 40 nmi. Long ranges reverse this, with longer pulses for more energy and lower rates so echoes have time to return.
Why the other answers are wrong
- A, 0.25 s PW and 1,000 pps.: 0.25 µs and 1,000 pps is a medium-range setting. The pulse is five times longer than needed at 1.5 miles, which blurs close targets and makes the minimum range larger.
- C, 1.0 s PW and 500 pps.: 1.0 µs and 500 pps is a long-range combination. The long pulse and low rate are chosen for detection at a distance, not for the sharp resolution needed at 1.5 miles.
- D, 2.5 s PW and 2,500 pps.: 2.5 µs is the longest pulse offered, which suits long range. Pairing it with a high 2,500 pps rate also makes no sense, because long pulses go with low repetition rates.