Element 3 Question 3-9B1
C3B09: Ohm’s Law-1
What value of series resistor would be needed to obtain a full scale deflection on a 50 microamp DC meter with an applied voltage of 200 volts DC?
- 4 megohms. (correct answer)
- 2 megohms.
- 400 kilohms.
- 200 kilohms.
Correct answer: A, 4 megohms.
Explanation
At full-scale deflection the meter passes exactly 50 µA, so the series resistor must limit current to that value at 200 V. Using Ohm's law: R = E / I = 200 V / 0.000050 A = 4,000,000 Ω = 4 MΩ. The meter's own small internal resistance is ignored here. This is how a sensitive current meter is turned into a high-range voltmeter.
Why the other answers are wrong
- B, 2 megohms.: 2 MΩ would let 200 V / 2 MΩ = 100 µA flow, twice the meter's full-scale current, driving the needle off scale.
- C, 400 kilohms.: 400 kΩ is a decimal slip: 200 V / 400 kΩ = 500 µA, ten times the 50 µA full-scale rating.
- D, 200 kilohms.: 200 kΩ would pass 200 V / 200 kΩ = 1 mA, twenty times the meter's rating; likely from mishandling the micro prefix.