Element 1 Question 1-13C6

C1C13: VHF Equipment Controls

Why must all VHF Distress, Urgency and Safety communications (as well as VTS traffic calls) be performed in Simplex operating mode?

  1. To minimize interference from vessels engaged in routine communications.
  2. To ensure that vessels not directly participating in the communications can hear both sides of the radio exchange. (correct answer)
  3. To enable an RCC or Coast station to only hear communications from the vessel actually in distress.
  4. To allow an RCC or Coast station to determine which transmissions are from other vessels and which transmissions are from the vessel actually in distress.

Correct answer: B, To ensure that vessels not directly participating in the communications can hear both sides of the radio exchange.

Explanation

In simplex, every station transmits and receives on the same frequency, so anyone tuned in hears both sides. In duplex, ship and shore transmit on different frequencies, and other ships hear only the shore side. Everyone nearby must hear distress, urgency and safety traffic so they can assist, relay a Mayday or keep silence. VTS traffic must be heard so all ships share the same traffic picture.

Why the other answers are wrong

Previous: 1-13C5 · All Element 1 questions · Next: 1-14C1

Practice C1C Equipment Operations