Element 1 Question 1-17C2
C1C17: Equipment Tests
When testing is conducted on 2182 kHz or Ch-16, testing should not continue for more than ______ in any 5-minute period.
- 2 minutes.
- 1 minute.
- 30 seconds.
- 10 seconds. (correct answer)
Correct answer: D, 10 seconds.
Explanation
47 CFR 80.101 limits radiotelephone test signals to no more than ten seconds each. Normally a test may not be repeated for at least one minute. On the distress frequencies 2182 kHz and VHF channel 16 (156.8 MHz), the gap between tests must be at least five minutes. That gives at most 10 seconds of test transmission in any 5-minute period, which keeps the distress channels clear.
Why the other answers are wrong
- A, 2 minutes.: Two minutes of test signal would tie up a distress channel far longer than the ten-second limit on any single test allows.
- B, 1 minute.: One minute is the shortest gap between repeated tests on ordinary working channels, not how long a test may last.
- C, 30 seconds.: Thirty seconds is how long a test must stop after another station says "wait". It is not the maximum length of a test.