Element 1 Question 1-19D1
C1D19: Antennas
What are the antenna requirements of a VHF telephony coast, maritime utility or ship station?
- The shore or on-board antenna must be vertically polarized. (correct answer)
- The antenna array must be type-accepted for 30-200 MHz operation by the FCC.
- The horizontally-polarized antenna must be positioned so as not to cause excessive interference to other stations.
- The antenna must be capable of being energized by an output in excess of 100 watts.
Correct answer: A, The shore or on-board antenna must be vertically polarized.
Explanation
47 CFR 80.81 requires all telephony emissions of a ship station, or a marine utility station on board ship, in the 30–200 MHz band to be vertically polarized. 47 CFR 80.72 requires the same of coast stations and shore-based marine utility stations. With one polarization across the marine VHF band, ship and shore antennas stay matched for the best range. That is why marine VHF antennas are vertical whips.
Why the other answers are wrong
- B, The antenna array must be type-accepted for 30-200 MHz operation by the FCC.: Part 80 sets a polarization requirement for VHF telephony antennas. It has no rule that the antenna array be FCC type-accepted for 30–200 MHz.
- C, The horizontally-polarized antenna must be positioned so as not to cause excessive interference to other stations.: Horizontal polarization is the opposite of the rule. Marine VHF telephony emissions from ship, coast and marine utility stations must be vertically polarized.
- D, The antenna must be capable of being energized by an output in excess of 100 watts.: The 'over 100 watts' wording comes from an MF radiotelegraph transmitter rule. Part 80 sets no power rating for VHF antennas; it caps VHF power instead (25 W ship, 50 W coast).