Element 3 Question 3-10B3
C3B10: Ohm’s Law-2
A 500-ohm, 2-watt resistor and a 1500-ohm, 1-watt resistor are connected in parallel. What is the maximum voltage that can be applied across the parallel circuit without exceeding wattage ratings?
- 22.4 volts.
- 31.6 volts. (correct answer)
- 38.7 volts.
- 875 volts.
Correct answer: B, 31.6 volts.
Explanation
Parallel resistors share the same voltage, so find each resistor's voltage limit from P = E²/R, or E = √(P × R). For the 500 Ω, 2 W part: √(2 W × 500 Ω) = √1000 ≈ 31.6 V. For the 1500 Ω, 1 W part: √(1 W × 1500 Ω) = √1500 ≈ 38.7 V. The lower limit governs: above 31.6 V the 500 Ω resistor would exceed 2 W.
Why the other answers are wrong
- A, 22.4 volts.: 22.4 V is √(1 W × 500 Ω), which pairs the 500 Ω resistor with the other part's 1 W rating instead of its own 2 W.
- C, 38.7 volts.: 38.7 V is the 1500 Ω resistor's limit. At that voltage the 500 Ω resistor would dissipate about 3 W, over its 2 W rating.
- D, 875 volts.: At 875 V the 500 Ω resistor would dissipate 875² / 500 ≈ 1531 W, far beyond either rating.