Element 3 Question 3-10B5
C3B10: Ohm’s Law-2
In Figure 3B2, what is the voltage drop across R1?

- 1.2 volts.
- 2.4 volts.
- 3.7 volts.
- 9 volts. (correct answer)
Correct answer: D, 9 volts.
Explanation
Without the zener, R1, R2 and R3 would put 12 V × 15 kΩ / 25 kΩ = 7.2 V across the zener's node. That is well above the zener's 3 V rating, so it breaks down and holds the node at 3 V. R1 sits between the 12 V supply and that 3 V node, so by Kirchhoff's voltage law V(R1) = 12 V − 3 V = 9 V. The zener current adjusts to absorb whatever current R1 passes beyond what the load draws.
Why the other answers are wrong
- A, 1.2 volts.: No reading of the circuit gives R1 1.2 V. Across the regulated 3 V, R3 drops 1 V and R2 drops 2 V, and R1 must take everything above 3 V.
- B, 2.4 volts.: 2.4 V is R3's drop if you ignore the zener (12 V / 25 kΩ = 0.48 mA × 5 kΩ). The zener does conduct and clamps the node at 3 V.
- C, 3.7 volts.: 3.7 V looks like the 3 V zener voltage plus a 0.7 V diode drop. That is a node voltage guess, not R1's drop, which is the supply minus 3 V.