Element 3 Question 3-20C5
C3C20: Capacitors
In Figure 3C5, the 1 μF capacitor is connected to a potentiometer that is used to:
- Increase gain.
- Neutralize amplifier.
- Couple.
- Adjust tone. (correct answer)
Correct answer: D, Adjust tone.
Explanation
The 1 µF capacitor runs from the second stage's collector to the wiper of a potentiometer in that stage's base-bias network. This creates collector-to-base feedback through an RC path. Because a capacitor's reactance falls as frequency rises, the amount of feedback depends on frequency. Moving the wiper changes how much of the high end is cut. An adjustable, frequency-selective network like this is a tone control.
Why the other answers are wrong
- A, Increase gain.: Gain, or volume, is set by the first potentiometer, whose wiper feeds the second stage. This RC network changes the frequency balance, not the overall level.
- B, Neutralize amplifier.: Neutralization cancels feedback through a transistor's internal capacitance in tuned RF amplifiers. This is a wideband audio amplifier.
- C, Couple.: Coupling capacitors pass signal on to the next stage, and the 47 µF capacitors do that here. The 1 µF capacitor loops back within the same stage.