Element 3 Question 3-20C4
C3C20: Capacitors
In Figure 3C5, which capacitor (labeled 1 through 4) is being used as a bypass capacitor?
- 1
- 2
- 3 (correct answer)
- 4
Correct answer: C, 3
Explanation
Capacitor 3 (0.1 µF) sits across the second stage's 100 Ω emitter resistor. The resistor sets the DC bias. At signal frequencies the capacitor's low reactance shorts the emitter to ground, removing the degeneration that resistor would cause and raising the stage's gain. A bypass capacitor routes AC around a component to ground. A coupling capacitor passes signal from one point to another while blocking DC.
Why the other answers are wrong
- A, 1: Capacitor 1 (47 µF, in series with 10 Ω) is the input coupling capacitor. It passes the audio into the first stage's base while blocking DC.
- B, 2: Capacitor 2 (47 µF) carries signal from the first stage's potentiometer wiper to the second stage's base, which makes it an interstage coupling capacitor.
- D, 4: Capacitor 4 (1 µF) links the second stage's collector to a potentiometer wiper as part of a tone network. It carries signal instead of shunting it to ground.