Element 3 Question 3-22C2
C3C22: Voltage Regulators, Zener Diodes
A switching electronic voltage regulator:
- Varies the conduction of a control element in direct proportion to the line voltage or load current.
- Provides more than one output voltage.
- Switches the control device on or off, with the duty cycle proportional to the line or load conditions. (correct answer)
- Gives a ramp voltage at its output.
Correct answer: C, Switches the control device on or off, with the duty cycle proportional to the line or load conditions.
Explanation
A switching regulator drives its control transistor fully on or fully off at high frequency instead of letting it conduct partway. It holds the output steady by changing the duty cycle (the fraction of each cycle the switch is on) as line voltage or load current changes, and an inductor and capacitor smooth the pulses. The switch wastes little power when fully on or off, so efficiency beats a linear regulator.
Why the other answers are wrong
- A, Varies the conduction of a control element in direct proportion to the line voltage or load current.: Continuously varying how hard a control element conducts is how a linear (series or shunt) regulator works, not a switching regulator.
- B, Provides more than one output voltage.: The number of outputs has nothing to do with the regulation method. Both linear and switching supplies can have one output or several.
- D, Gives a ramp voltage at its output.: A regulator exists to deliver a steady DC output. A ramp (sawtooth) is a sweep or timing waveform, not regulated power.