Element 3 Question 3-41F1
C3F41: Receiver Theory
What is the limiting condition for sensitivity in a communications receiver?
- The noise floor of the receiver. (correct answer)
- The power supply output ripple.
- The two-tone intermodulation distortion.
- The input impedance to the detector.
Correct answer: A, The noise floor of the receiver.
Explanation
Sensitivity is the weakest signal a receiver can usefully detect. Every receiver has a noise floor: thermal noise in its bandwidth plus noise its own stages add. A signal below that floor cannot be told apart from the noise, so the noise floor sets the minimum discernible signal. A lower noise figure or a narrower bandwidth lowers the floor and improves sensitivity.
Why the other answers are wrong
- B, The power supply output ripple.: Power supply ripple can add hum, but a properly filtered supply does not set the basic limit on how weak a signal can be detected.
- C, The two-tone intermodulation distortion.: Two-tone intermodulation limits strong-signal handling and dynamic range. It does not limit weak-signal sensitivity.
- D, The input impedance to the detector.: Detector input impedance affects stage matching. The weakest usable signal is set by noise ahead of the detector, not by this impedance.