Element 3 Question 3-41F2
C3F41: Receiver Theory
What is the definition of the term “receiver desensitizing”?
- A burst of noise when the squelch is set too low.
- A reduction in receiver sensitivity because of a strong signal on a nearby frequency. (correct answer)
- A burst of noise when the squelch is set too high.
- A reduction in receiver sensitivity when the AF gain control is turned down.
Correct answer: B, A reduction in receiver sensitivity because of a strong signal on a nearby frequency.
Explanation
Desensitizing (desense) happens when a strong signal near the operating frequency overloads the RF stage or mixer, or drives the AGC down. Receiver gain drops, so a weak desired signal becomes harder or impossible to hear, even though the strong signal is not on the same channel. A typical case is a nearby transmitter on an adjacent channel or band.
Why the other answers are wrong
- A, A burst of noise when the squelch is set too low.: Noise bursts with the squelch set too low are just the squelch opening on noise. Sensitivity is not reduced.
- C, A burst of noise when the squelch is set too high.: A squelch set too high mutes weak signals rather than producing noise bursts. Neither effect is desense from a strong nearby signal.
- D, A reduction in receiver sensitivity when the AF gain control is turned down.: Turning down the AF gain only lowers speaker volume. RF sensitivity is unchanged, and that is not what desensitizing means.