Element 3 Question 3-42F1
C3F42: RF Amplifiers
How can selectivity be achieved in the front-end circuitry of a communications receiver?
- By using an audio filter.
- By using an additional RF amplifier stage.
- By using an additional IF amplifier stage.
- By using a preselector. (correct answer)
Correct answer: D, By using a preselector.
Explanation
A preselector is a set of tuned circuits (filters) between the antenna and the mixer that passes the wanted frequency range and attenuates others. Front-end selectivity like this rejects image frequencies and strong out-of-band signals before they reach the mixer, where they could cause images, intermodulation or desense.
Why the other answers are wrong
- A, By using an audio filter.: An audio filter comes after detection, far from the front end. It cannot stop images or overload in the RF stages.
- B, By using an additional RF amplifier stage.: An extra RF amplifier adds gain, which can make overload worse. Selectivity comes from the tuned filtering, not from amplification.
- C, By using an additional IF amplifier stage.: IF amplifiers come after the mixer. They add gain and can sharpen adjacent-channel selectivity, but they are not front-end circuitry.