Element 3 Question 3-42F2
C3F42: RF Amplifiers
What is the primary purpose of an RF amplifier in a receiver?
- To provide most of the receiver gain.
- To vary the receiver image rejection by utilizing the AGC.
- To improve the receiver’s noise figure. (correct answer)
- To develop the AGC voltage.
Correct answer: C, To improve the receiver’s noise figure.
Explanation
The RF amplifier is the first active stage, so it mainly sets the receiver's noise figure. A low-noise RF stage with modest gain keeps noise from the mixer and later stages from limiting weak-signal reception. Its tuned circuits also help image rejection, but most of the overall gain comes from the IF strip.
Why the other answers are wrong
- A, To provide most of the receiver gain.: Most receiver gain is provided by the IF amplifiers. RF stage gain is kept modest to avoid overloading the mixer.
- B, To vary the receiver image rejection by utilizing the AGC.: Image rejection comes from RF selectivity ahead of the mixer, with preselector tuning that tracks the local oscillator, not from varying RF gain with the AGC.
- D, To develop the AGC voltage.: The AGC voltage is derived from the detector or IF output. It is fed back to the RF stage, not generated there.