Element 3 Question 3-42F4
C3F42: RF Amplifiers
Too much gain in a VHF receiver front end could result in this:
- Local signals become weaker.
- Difficult to match receiver impedances.
- Dramatic increase in receiver current.
- Susceptibility of intermodulation interference from nearby transmitters. (correct answer)
Correct answer: D, Susceptibility of intermodulation interference from nearby transmitters.
Explanation
Excess front-end gain sends strong nearby signals into the mixer and later stages at levels that drive them nonlinear. Two or more transmitter signals then mix and create spurious products, such as 2f1 − f2, that can land on the channel you are trying to receive. This is intermodulation interference, a common problem at crowded VHF sites like marinas and repeater towers.
Why the other answers are wrong
- A, Local signals become weaker.: More gain makes local signals stronger, not weaker; the problem is that they become strong enough to overload the receiver.
- B, Difficult to match receiver impedances.: Impedance matching depends on the input and output networks, not on how much gain the stage is set for.
- C, Dramatic increase in receiver current.: Small-signal RF gain has little effect on the receiver's total current draw; the real symptom of too much gain is overload, not a jump in current.