Element 3 Question 3-45F6
C3F45: IF Amplifiers
How should the filter bandwidth of a receiver IF section compare with the bandwidth of a received signal?
- Slightly greater than the received-signal bandwidth. (correct answer)
- Approximately half the received-signal bandwidth.
- Approximately two times the received-signal bandwidth.
- Approximately four times the received-signal bandwidth.
Correct answer: A, Slightly greater than the received-signal bandwidth.
Explanation
The ideal IF filter is just slightly wider than the signal. It then passes every sideband component without distortion, while rejecting as much noise and adjacent-channel interference as possible. A narrower filter cuts off part of the signal. A much wider one admits noise and interference that the signal does not need.
Why the other answers are wrong
- B, Approximately half the received-signal bandwidth.: A filter half the signal bandwidth cuts off part of the sidebands, distorting the signal and losing intelligibility.
- C, Approximately two times the received-signal bandwidth.: Twice the signal bandwidth admits about twice the noise power and invites adjacent-channel interference, with no gain in signal.
- D, Approximately four times the received-signal bandwidth.: Four times the signal bandwidth throws away most of the selectivity, letting in noise and neighboring signals.