Element 3 Question 3-46F3
C3F46: Filters and IF Amplifiers
What is the primary purpose of the first IF amplifier stage in a receiver?
- Noise figure performance.
- Tune out cross-modulation distortion.
- Dynamic response.
- Selectivity. (correct answer)
Correct answer: D, Selectivity.
Explanation
The main IF filter is placed at the input of the first IF stage, right after the mixer. Adjacent-channel and other unwanted signals are removed there, before later stages can amplify them or be overloaded by them. So the first IF stage's key role is selectivity, and the later stages provide most of the gain.
Why the other answers are wrong
- A, Noise figure performance.: A receiver's noise figure is set mainly by the RF amplifier and mixer ahead of the IF. Selectivity is the first IF stage's job.
- B, Tune out cross-modulation distortion.: Cross-modulation comes from nonlinear mixing in earlier stages. Once present on the signal, it cannot be tuned out in the IF.
- C, Dynamic response.: "Dynamic response" is not the purpose of the first IF stage. Its role is establishing selectivity.