Element 3 Question 3-75L6
C3L75: Test Equipment
Which of the following contains a multirange AF voltmeter calibrated in dB and a sharp, internal 1000 Hz bandstop filter, both used in conjunction with each other to perform quieting tests?
- SINAD meter. (correct answer)
- Reflectometer.
- Dip meter.
- Vector-impedance meter.
Correct answer: A, SINAD meter.
Explanation
A SINAD meter measures (signal + noise + distortion) / (noise + distortion). The receiver is fed a carrier modulated with a 1000 Hz tone. The meter reads the total audio output, then a sharp 1000 Hz notch removes the tone so only noise and distortion remain. The ratio of the two readings, shown in dB, gives figures such as 12 dB SINAD sensitivity, the standard FM quieting test.
Why the other answers are wrong
- B, Reflectometer.: A reflectometer samples forward and reflected RF on a transmission line to show SWR. It has no audio voltmeter or 1000 Hz notch filter.
- C, Dip meter.: A dip meter is a tunable oscillator that finds the resonant frequency of a tuned circuit by a dip in its meter. It does not measure receiver audio quality.
- D, Vector-impedance meter.: A vector-impedance meter measures the magnitude and phase angle of an impedance. It does not analyze receiver audio for noise and distortion.